The Evolution Fasteners listed below are approved for use with Metsec Steel Framing Systems. Click on a product to be directed to its page, where you can purchase it online for next day delivery from Ceilings & More.
- Only the fixings specified below or similar recommended should be used with Metsec Framing.
- For similar recommended fixings please contact Metsec.
- Fixing codes have been supplied by the fixing manufacturer and in the event of any fixing not performing as required the fixings manufacturer should be contacted before Metsec.
- Fixings given below are a guide to the range of fixings often used with Metsec Framing. Project specific fixings may be used in addition to those given below and these will be shown on the Metsec project specific details.
| GENERAL FRAMING FIXINGS | ||
|---|---|---|
| GENERAL FRAMING SCREWS FOR FIXING STUDS, JOISTS, RUNNERS AND BRACING SECTIONS | ||
| 1.2mm - 4.0mm COMBINED STEEL THICKNESS |  |
TSPH5.5-19-3 |
| 1.2mm - 4.0mm COMBINED STEEL THICKNESS |  |
TSPH5.5-25-3 |
| 1.2mm - 4.0mm COMBINED STEEL THICKNESS |  |
TSHW5.5-25-3 |
| 3.0mm to MAX. 12.5mm COMBINED STEEL THICKNESS |  |
TSLP5.5-38-5 |
| 3.0mm to MAX. 12.5mm COMBINED STEEL THICKNESS |  |
TSHW5.5-38-5 |
| FIXINGS TO CONCRETE | ||
|---|---|---|
| HEX HEAD CONCRETE ANCHOR SCREWS | ||
| FIXING 1.2 - 3.0mm STEEL TO CONCRETE |  |
MSHH6.3-45-516 |
| FIXING 3.0 - 15.0mm STEEL TO CONCRETE |  |
MSHH6.3-57-516 |
| FIXING SHEATHING BOARDS AND TIMBER TO STEEL | ||
|---|---|---|
| COUNTERSUNK WING TIPPED SCREWS | ||
| FIXING TO 1.2 - 3.0mm STEEL. BOARD THICKNESS 6.0mm to 19mm |  |
TSTF4.8-38-3 |
| FIXING TO 1.2 - 3.0mm STEEL BOARD THICKNESS 13mm to 29mm |  |
TSTF5.5-50-3 |
| FIXING TO 1.2 - 3.0mm STEEL BOARD THICKNESS 25mm to 60mm |  |
TSTF5.5-85-3 |
| FIXING TO 1.2 - 3.0mm STEEL BOARD THICKNESS 65mm to 100mm |  |
TSTF5.5-120-3 |
| FIXING TO 1.2 - 3.0mm STEEL. BOARD THICKNESS 65mm to 100mm |  |
TSTF5.5-65-5 |
| FIXING BRICK TIE CHANNELS TO STEEL | ||
|---|---|---|
| STAINLESS STEEL HEX HEAD SCREWS WITH EPDM SEALING WASHER | ||
| FIXING BRICK TIE CHANNEL VIA 50mm INSULATION TO 1.2 - 3.0mm STEEL |  |
BMTSBWHT5.5-80-3 |
| FIXING BRICK TIE CHANNEL VIA 50mm INSULATION TO 3.0 - 6.0mm STEEL |  |
BMTSBWHT5.5-105-5 |
| FIXING PLASTERBOARD TO STEEL | ||
|---|---|---|
| BUGLE CSK HEAD SELF DRILLING DRYWALL SCREWS / WING TIPPED SCREWS | ||
| FIXING TO 1.2mm STEEL. DOUBLE BOARDS UP TO 15mm COMBINED THICKNESS. |  |
DWSDZ25 |
| FIXING TO 1.2mm STEEL. DOUBLE BOARDS UP TO 30mm COMBINED THICKNESS. |  |
DWSDZ42 |
| FIXING TO 1.2 - 2.0mm STEEL. SINGLE BOARD UP TO 15mm THICK | |
DWSDZ25 |
| FIXING TO 1.2 - 2.0mm STEEL. DOUBLEBOARDS UP TO 30mm COMBINED THICKNESS. | |
DWSDZ42 |
| FIXING TO 2.0 - 6.0 mm STEEL. SINGLE BOARD UP TO 15mm THICK | |
TSTF4.8-38-3 |
| FIXING TO 2.0 - 6.0 mm STEEL. DOUBLE BOARDS UP TO 30mm COMBINED THICKNESS | |
TSTF5.5-65-5 |